Zn, Pb, Cu and As distribution patterns in overbank and medium-order stream sediment samples: their use in exploration and environmental geochemistry     

R. Swennen  J. Van der Sluys 《Journal of Geochemical Exploration》1998,65(1):27-45

Overbank and medium-order stream sediment samples were collected in Belgium and Luxembourg from 66 sampling locations (area of about 33,000 km²) and analysed for major and trace elements among which Zn, Pb, Cu and As. At each sampling location large bulk samples were taken, namely in the lower (normally at ≥1.5 m depth, over an interval of about 20–40 cm) and upper (normally upper 5–25 cm) parts of the overbank profiles and from the stream sediments. Furthermore, at a number of these sites, a detailed geochemical analysis of vertical overbank sediment profiles (sampling intervals of 10–20 cm) was subsequently carried out to unravel element variations through time and to help in the overall evaluation. For most sampled sections evidences such as ¹⁴C-dating and the absence of anthropogenic particles point towards a pre-industrial and often pristine origin of the lower overbank sediment samples. From the latter bulk samples, mean background concentrations were deduced. They reveal the existence of significant differences between the northern and southern part of Belgium (incl. Luxembourg) which relate to the difference in geological substrate. In the north dominantly non-lithified Quaternary and Tertiary sands, marls and clays occur while in the south Palaeozoic sandstones, shales and carbonate rocks outcrop. Consequently separate mean background values were calculated for the two areas. In the southern study area, some anomalous metal concentrations have been recorded in pre-industrial sediments. They are derived from mineralised Palaeozoic rocks, a feature which could be of interest for base metal exploration. In the upper overbank and stream sediments, in general, higher heavy metal and As contents were recorded with highest values in areas with metal mining, metal melting and cokes treatment industries. By comparing the trace element concentrations of the upper overbank or stream sediment samples with the concentrations detected in the lower overbank samples at each of the sampling locations, and by evaluating the vertical distribution patterns where available, the degree of pollution of the alluvial plain and the present-day stream sediments can be assessed. From this exercise, it is clear that highest pollution occurs in the northern part of Belgium, which relates to its high population density and industrial development.  相似文献   

Geochemistry of overbank and high-order stream sediments in Belgium and Luxembourg: a way to assess environmental pollution     

R. Swennen  J. van der Sluys  R. Hindel  A. Brusselmans 《Journal of Geochemical Exploration》1998,62(1-3)

A geochemical survey of Belgium and Luxembourg was carried out as part of an international research project entitled ‘Regional geochemical mapping of Western Europe towards the year 2000'. The aim of this research was to map regional background geochemical patterns based on pristine or at least pre-industrial overbank samples and to deduce regional information on the degree of environmental pollution of floodplain and present-day river sediments. Over the entire study area (about 33,000 km²), 66 overbank sites have been sampled. Catchment areas range between 60 and 600 km². At each site an overbank profile has been dug out in the immediate vicinity of the river and described in detail. A first composite sample was taken 5–25 cm below the surface. This sample is supposed to represent deposition over the last centuries. Human interferences in this interval are often inferable based on changed sedimentary characteristics and the presence of anthropogenic particles such as charcoal, slags and brick fragments. A second composite sample was taken at depth, usually >1.5 m below the surface over an interval of about 20 cm. In most sites, the profile characteristics allowed to assume pre-industrial or even pristine conditions for this lower overbank sample. In some profiles this was confirmed by ¹⁴C-dating and/or by the absence of anthropogenic particles. Finally, a present-day stream sediment was sampled on the site to infer the actual pollution status. After drying at 80°C, disaggregation and sieving, the <125 μm fractions of the three sediment samples were analysed by XRF for major elements and several trace elements. Lower overbank samples generally show a direct link with the geological substrate and allow to assess natural background concentrations. Results from the mapping exercise as well as from the statistical analyses display a clear contrast between the northern part of Belgium where Cenozoic unconsolidated sandy and silty formations dominate which are especially vulnerable for erosion, and the southern part of Belgium and Luxembourg where Paleozoic and Mesozoic sandstones, carbonates, marls and shales are the prevalent lithologies. Here the shales are the most intensively eroded lithologies. This is especially reflected in the element patterns of Al₂O₃, MgO, K₂O, Ga, Ni, Rb, Sc and V which negatively correlate with SiO₂. Despite the human related pollution, the geological contrast between north and south Belgium is still recognisable in the geochemical pattern of the upper overbank and present-day stream sediment samples for the above-mentioned elements. Furthermore there is a clear increase in heavy metal contents (Zn, Cd, Pb, Cu), As and in certain locations in Ba from the lower to the upper overbank sediment, as well as to the present-day stream sediment. The relative increase in element content allows to assess the degree of pollution and helps to define those drainage areas where more detailed research is needed.  相似文献   

Grain-size trends, basin subsidence and sediment supply in the Campanian Castlegate Sandstone and equivalent conglomerates of central Utah   总被引：2，自引：1，他引：1  

Ruth A. J. Robinson  & Rudy L. Slingerl 《Basin Research》1998,10(1):109-127

Reconstructions of grain-size trends in alluvial deposits can be used to understand the dominant controls on stratal architecture in a foreland basin. Different initial values of sediment supply, tectonic subsidence and base-level rise are investigated to constrain their influence on stratal geometry using the observed grain-size trends as a proxy of the goodness of fit of the numerical results to the observed data. Detailed measurements of grain-size trends, palaeocurrent indicators, facies and thickness trends, channel geometries and palynological analyses were compiled for the middle Campanian Castlegate Sandstone of the Book Cliffs and its conglomerate units in the Gunnison and Wasatch plateaus of central Utah. They define the initial conditions for a numerical study of the interactions between large-scale foreland basin and small-scale sediment transport processes. From previous studies, the proximal foreland deposits are interpreted as recording a middle Campanian thrusting event along the Sevier orogenic belt, while the stratal architecture in the Book Cliffs region is interpreted to be controlled by eustatic fluctuation with local tectonic influence. Model results of stratal geometry, using a subsidence curve with a maximum rate of ≈45 m Myr^?1 for the northern Wasatch Plateau region predict the observed grain-size trends through the northern Book Cliffs. A subsidence curve with a maximum rate of ≈30 m Myr^?1 in the Gunnison–Wasatch Plateaus best reproduces the observed grain-size trends in the southern transect through the southern Wasatch Plateau. Eustasy is commonly cited as controlling Castlegate deposition east of the Book Cliffs region. A eustatic rise of 45 m Myr^?1 produces grain-size patterns that are similar to the observed, but a rate of eustatic rise based on Haq et al. (1988) will not produce the observed stratal architecture or grain-size trends. Tectonic subsidence alone, or a combined rate of tectonic subsidence and a Haq et al. (1988) eustatic rise, can explain the stratal and grain-size variations in the proximal and downstream regions.  相似文献   

Crustal thickening and crustal extension as controls on the evolution of the drainage network of the central Swiss Alps between 30  Ma and the present: constraints from the stratigraphy of the North Alpine Foreland Basin and the structural evolution of the Alps     

Fritz Schlunegger  Rudy Slingerl  & Albert Matter 《Basin Research》1998,10(2):197-212

The combined information about sedimentary petrography from the North Alpine Foreland Basin and structural geology from the Alps allows a qualitative reconstruction of the drainage network of the central Swiss Alps between 30 Ma and the present. This study suggests that crustal thickening and crustal thinning significantly controlled the location of the drainage divide. It also reveals the possible controls of crustal thickening/thinning on the change of the orientation of the drainage network from across-strike between 30 and 14 Ma to along-strike thereafter. Initial crustal thickening in the rear of the wedge is considered to have formed the drainage divide between north and south at 30 Ma. Because the location of crustal thickening shifted from east to west between ≈30–20 Ma, the catchment areas of the eastern dispersal systems reached further south than those of the western Alpine palaeorivers for the same time slice. Similarly, the same crustal dynamics appear to have controlled two phases of denudation that are reflected in the Molasse Basin by petrographic trends. Uplift in the rear of the wedge caused the Alpine palaeorivers to expand further southward. This is reflected in the foreland basin by increasing admixture of detritus from structurally higher units. However, tectonic quiescence in the rear of the wedge allowed the Alpine palaeorivers to cut down into the Alpine edifice, resulting in an increase of detritus from structurally lower units. Whereas uplift in the rear of the wedge was responsible for initiation of the Alpine drainage systems, underplating of the external massifs some 50 km further north is thought to have caused along-strike deviation of the major Alpine palaeorivers. Besides crustal thickening, extension in the rear of the wedge appears to have significantly controlled the evolution of the drainage network of the western Swiss Alps. Slip along the Simplon detachment fault exposed the core of the Lepontine dome, and caused a 50-km-northward shift of the drainage divide.  相似文献   

Lithogeochemical patterns around Pb-Zn mineralizations in Dinantian carbonate rocks of (eastern) Belgium     

R. Swennen  W. Viaene 《Mineralium Deposita》1990,25(4):251-261

The lithogeochemical distribution patterns of Mg, Sr, Na, Zn, Pb, Fe, Mn, K, Corg (organic matter) and IR (insoluble residue) in the Dinantian limestones and dolomites from the eastern part of Belgium have been studied (Dinant and Verviers synclinorium). Comparison of geochemical data of non-mineralized strata revealed higher background values in the strata of the Verviers synclinorium where Pb-Zn mineralizations occur. In this area a relation may exist with the metallogenetic district (Herve-Vesdre-Theux district; proposed by Dejonghe 1985b). However, the higher background values also could relate to the more restricted sedimentation conditions in the Verviers synclinorium as opposed to the more open marine conditions in the Dinant synclinorium. The influence of mineralization on the geochemistry of limestones is limited and unpredictable. In dolomites, however, the effect can be important. In these rocks, the lithogeochemical distribution of Zn, Pb and Mn can be subdivided into three populations, i.e. a regional background, a local high background and a halo population. The higher trace element concentrations in the halo population is caused by the existence of disseminated sulfide minerals (sphalerite, galena and pyrite) and Zn-bearing goethite (mainly pseudomorphs after pyrite) and Mn-oxides. The sulfides relate to the ore emplacement. In the local high background only the Zn-bearing oxides occur. Their presence and thus the development of the local high background relates to weathering processes.  相似文献   

Utilization of Shallow Geophysical Sensing at Two Abandoned Municipal/Industrial Waste Landfills on the Missouri River Floodplain     

Richard J. Rudy  John A. Caoile 《Ground Water Monitoring & Remediation》1984,4(4):57-65

In the past 30 to 40 years, floodplain areas of large rivers, such as the Missouri River, have been extensively used for large industrial and municipal landfills. Many of these sites are now causing varying degrees of ground water contamination. Rapid geophysical characterization techniques have proven useful for delineation of anomalous areas indicative of potential contaminant plumes. These methods have also resulted in a cost effective approach to the location and number of monitoring wells.
An effective technique to initially characterize ground water contamination at such landfills along the Missouri River in northwestern Missouri involved a combination of electrical resistivity and electromagnetic conductivity methods. Resistivity was used to obtain soundings of the alluvium by using a modified Wenner array and to corroborate shallow electromagnetic conductivity measurements by using short Wenner array electrode spacings.
Upon confirmation of similar measurements of the upper soils for the two methods, numerous electromagnetic conductivity traverses were made at each landfill site. The data generated from these surveys were graphed and contoured to delineate anomalous areas. Based on the geophysical study, a ground water monitoring well network was then designed for each landfill.
As a result, a minimal number of wells were required to initially characterize the ground water quality at these two sites. In general, analysis of water samples from these wells displayed good correlation with the geophysical results.  相似文献   

Sedimentary processes and trace metal contaminants in the buccaneer oil/gas field,northwestern gulf of Mexico     

Richard B. Wheeler  John B. Anderson  Rudy R. Schwarzer  Claudia L. Hokanson 《Environmental Geology》1980,3(3):163-175

Sediments are the ultimate sink for contaminants in the marine environment, and physical processes of sedimentation influence the distribution and accumulation of these contaminants. Evaluation of contaminant levels in sediments is one approach to assessing environmental impact; data interpretation depends on consideration of sediment texture and mineralogy, however, which profoundly influence chemical composition. In this study, comparison of potentially contaminated sediments from the production field with control populations was done only within the context of similar (as to texture and organic carbon and carbonate content) sample groups as determined by cluster analysis. Ba, Cd, and Sr are identified as contaminants. Supported by the identification of a well-crystallized expandable clay—possibly bentonite—drilling fluids are a potential source of Ba. Ba and Sr may be unnaturally high because of their abundance in discharged produced formation waters, but may also be naturally controlled by the unique faunal assemblage associated with the structures. Cd is probably derived from corrosion of the structures and assorted debris on the seafloor. In general, contamination is limited to an area within 100 m of the platforms. Furthermore, substantial erosion around platforms has probably effectively removed and dispersed the bulk of the contaminants introduced into the marine environment by the offshore exploration/production operations.  相似文献   

From field study to numerical modeling of hydrothermal dolomitization in Early Cretaceous platform carbonates (Cantabrian mountains,northern Spain)     

F.H. Nader  C. Dumont  M.M. Shah  D. Garcia  R. Swennen  J.-M. Daniel  O. Lerat  B. Doligez 《Journal of Geochemical Exploration》2009

  相似文献   

Geogene Versus Anthropogene Origin of Trace Metals in Sediments in Cua Luc Estuary and Ha Long Bay, Vietnam     

Huu Hieu Ho  Rudy Swennen  Valérie Cappuyns  Elvira Vassilieva  Gerda Neyens  Mustafa Rajabali  Tan Van Tran 《Estuaries and Coasts》2013,36(1):203-219

In the present study, the geochemistry of 49 surficial-bed and 101 core sediment samples is investigated to clarify the origin of trace metals in the Cua Luc Estuary and Ha Long Bay, which is a famous World Natural Heritage Site in Vietnam. Moreover, the potential mobility of trace metals is also assessed and their relationship with reference elements (Al, Fe, and Ca) and organic matter is established in order to make recommendations for sediment management and monitor future pollution. Generally, trace metals display higher concentrations in Ha Long Bay compared to the Cua Luc Estuary. However, this is controlled by the distribution of the fine (clay?+?silt) fraction, and hence the concentrations of Al, Fe, Ca, and organic matter (OM). The comparison of concentrations of trace metals (normalized towards Al) between the surficial sediments and the subsurface core sediments based on ¹³⁷Cs datings indicates that almost all surficial-sediment data fall inside or deviate slightly from the 95 % prediction interval of a background regression line. In addition, as determined by a Community Bureau of Reference three-step extraction, trace metals mainly dominate in the residual fraction (assumed to relate to crystal lattice of primary and secondary minerals), and this fraction does not change much in recent sediment layers. Therefore, trace metals are supposed to be derived from natural bio/geochemical processes and are characterized by a low potential mobility. Consequently, the established linear regression relationships of trace metal vs. Al or multiple regression relationships of trace metal vs. multi-elements (Al, Fe, Ca, and OM) are useful for the prediction of background levels of trace metals in sediments in future pollution monitoring and assessment programs.  相似文献   

Structure and nuclear density distribution in the cheralite—CaTh(PO4)2: studies of its behaviour under high pressure (36?GPa)     

Philippe E. Raison  Stephen Heathman  Gilles Wallez  Carmen E. Zvoriste  Denis Bykov  Ga?l Ménard  Emmanuelle Suard  Karin Popa  Nicolas Dacheux  Rudy J. M. Konings  Roberto Caciuffo 《Physics and Chemistry of Minerals》2012,39(8):685-692

The crystal structure of the cheralite—CaTh(PO₄)₂—has been revisited by neutron diffraction and its behaviour under high pressure investigated by X-ray diffraction up to 36?GPa. The neutron diffraction data at ambient pressure gave a more accurate determination of the Ca/Th cation position than previous XRD data, taking advantage that the neutron scattering lengths of calcium and thorium are of same order of magnitude. The nuclear density distribution was also determined using the maximum entropy method (MEM) confirming that the two cations are not located at the same position in the unit cell but are slightly displaced from one another along a specific direction in order to minimize the electrostatic repulsion with the surrounding phosphorus atoms. At high pressure, the compound did not show any phase transition or amorphization. From the evolution of the unit-cell volume as a function of the pressure, the zero-pressure bulk modulus B₀ and its pressure derivative B₀ ^′ have been determined by fitting the experimental compressibility curve to the Birch–Murnaghan equation of state. The results are B₀?=?140(2) GPa and B ₀ ^′ ?=?4.4(4) GPa.  相似文献